FUTEK LSB200 Micro S-type Tension and Compression Sensor

Micro S-type axial tension and compression force, range 10g-100lb, overload protection function with structural limit, material 2024 aluminum alloy or 17-4phs.s. stainless steel, #29 AWG 4-core braided shielded silicone rubber cable, length 1.5 meters, metric thread optional (M3x0.5)

LSB200 is a micro force sensor with excellent dynamic characteristics, developed and produced by FUTEK and provided with lifetime warranty service. This micro force sensor is one of the iconic products in the FUTEK force sensor series and is widely used in many industries. Among them, LSB200 is often used in the medical industry and has been widely used in the fields of pharmaceutical packaging weight gain, automated feedback control and online production. This product perfectly combines the requirements of size, accuracy and overload protection, and is one of FUTEK’s most popular products. The height of LSB200 is only 19mm, which can meet the needs of use in small spaces. The LSB200 sensor provides a new USB digital interface output solution with 24-bit resolution.

Category: Sensor

Product Features:

Miniature size
10 times overload protection
Light weight
Good linearity
Range up to 445N

Specifications:

Performance
Range: 0.1, 0.2, 0.5, 1, 2.5, 4.5, 8.9, 22.2, 44.5, 111, 222, 445 N
Linearity: 0.1% F.S
Hysteresis: 0.05% F.S
Repeatability: 0.05% F.S.
Electrical characteristics
Sensitivity: 2 mV/V
Excitation voltage: 10 V Max
Bridge resistance: 350, 700 Ohm nom
Insulation resistance: ≥500 MOhm @ 50 VDC
Cable: #29 AWG 4-core braided shielded silicone rubber cable, length 1.5 meters
Mechanical characteristics
Force direction: tension and compression bidirectional
Weight: 9 g
Overload protection: 1000% F.S., 200% tension and compression (222 – 445 N)
Material: Aluminum alloy or stainless steel
Protection level: IP40
Environmental characteristics
Operating temperature: -50 to 93°C
Compensated temperature: 15 to 72°C
Zero drift: 0.018% of RO/°C
Temperature drift: 0.036% of Load/°C
Calibration
Calibration voltage: 5 VDC
Calibration (standard): 5-point tension
Calibration (optional): 10-point tension and compression
Shunt calibration resistance: 60.4 – 301 kOhm